For food production sites
Storage cold room and department monitoring for food production sites
More cold rooms, more departments, more managers. One history, thresholds per cold room, alerts to whoever is on shift.
At a production site the cold chain is not one cold room: it is the raw material cold rooms, the finished product ones, the blast chillers, the temperature-controlled processing areas, often across several shifts and several sites. KRYO reads every point every 3–5 minutes, alerts the recipients in the right department while the problem is happening, keeps the history per cold room and exports it for the quality manager and for audits.
No commitment · All we need is your type of business, number of cold rooms, main requirement and your contact details
Where problems happen at a production site
Between shifts
The finished product cold room warms up at 22:00, after the second shift leaves and before the first arrives. Who notices, and when?
Divided responsibilities
Warehouse, production and quality each watch different cold rooms. Without a single history, reconstructing an event means going through three logs and three people.
The audit
The customer or the authority asks for a cold room’s temperatures for a given batch and period. A hand-filled sheet does not say what happened between one reading and the next.
What KRYO monitors at a production site
- Storage cold rooms for raw materials, semi-finished and finished products, chilled and frozen
- Blast chillers, in holding mode, and stabilisation cold rooms
- Processing areas under temperature control: ambient temperature and humidity
- Cold room doors: openings logged with time and duration, alert if a door stays open longer than the time configured for that cold room
- Electrical consumption per cold room (single-phase and three-phase) or per department panel: where the unit works hardest, how it changes over time
- Thresholds and recipients per cold room and per department, multiple sites in the same service
- History and export: PDF reports per cold room and period with an integrity fingerprint; data export for the quality system
In the free assessment we start from the map of cold rooms and the people responsible for them: which points, which thresholds, who receives what.
How a site is organised with KRYO
| Raw material cold rooms | thresholds per product · alerts to the warehouse |
| Finished product cold rooms | thresholds per product · alerts to production and quality |
| Processing areas | temperature and humidity · alerts to the department head |
| Department panels | consumption per department · weekly review with maintenance |
| Site 2 | same service, same history, its own recipients |
Example set-up; thresholds and recipients are defined with the quality manager and the self-monitoring plan.
Three typical situations, from event to action
Illustrative examples with sample values.
Cold room out of range between two shifts
Detected: −14 °C for two consecutive readings, threshold −18 °C. Alert: to the on-call production manager and the warehouse. Check: door closed; irregular power draw from the unit since 21:40. Action: move the batches to the backup cold room, call maintenance with the data; the non-conformity stays on record by batch and period.
Temperatures of one cold room for a March batch
Information available: reading history and daily verdict for the cold room over the requested period. Access: PDF report per cold room and period, with integrity fingerprint. Check: any temperature excursions with start, end and duration. Action: hand the report to the customer or the auditor with no manual reconstruction.
A department panel drawing more power
Detected: storage department consumption rising for two weeks at the same load. Information available: trend per cold room, compared with the previous period. Check: one cold room runs longer than the others at the same temperature. Action: schedule an inspection of that cold room with maintenance. KRYO does not identify the cause: it provides the data to look for it.
Documentation for the quality system
Every reading stays in the history with date, time and source sensor and cannot be edited or deleted from the interface; every threshold change is tracked. There is a verdict for every cold room and every day; for every cold room and period, a PDF report with an integrity fingerprint (SHA-256) kept in the log, plus data export for the quality system.
KRYO helps you meet the temperature monitoring and recording obligations that apply to your site, within the self-monitoring plan: the plan, the critical limits, the corrective actions and the assessment of which requirements apply to your products (including those specific to quick-frozen foods) remain yours and your consultant’s. The guide, with sources
Questions from production and quality managers
How many cold rooms can a single service cover?
Can I have different recipients per department?
How do I export the data for our quality system?
We have cold rooms for quick-frozen foods: does KRYO cover the requirements of Regulation (EC) No 37/2005?
Does it involve any work on the units or the panel?
From the map of your cold rooms to a proposal.
Tell us how many cold rooms you have and what your main need is: we start from there.