Automatic cold-chain control for businesses that store food and other cold-chain products · wireless sensors, pre-configured kit

What it monitors · the offer

What KRYO monitors: temperature, energy consumption, doors and production room climate

An automatic cold-chain control service, integrated into your HACCP self-monitoring plan.

KRYO helps you meet the temperature monitoring and record-keeping obligations that apply to your business. There is only one result: always knowing whether the cold chain is under control, finding out early when it is not, and having the evidence ready for inspections. Here you will find what the base service includes, what is activated through configuration and what is coming.

The four areas of control

Every area produces the same kind of result: readings at regular intervals, an alert when a value stays out of range and a record that is kept, in the same history. Cold room temperature is the base service; doors, energy, production room and labels are activated through the configuration agreed in the proposal.

Base

Cold room: temperature and humidity

Chilled and frozen cold rooms, fridges, freezers, display cases, blast chillers, refrigerated cabinets. Readings at regular intervals (normally every 3–5 minutes), a history for every point, alerts after consecutive out-of-range readings, non-conformities with start, end and duration, a daily verdict per cold room and a PDF report with an integrity fingerprint. The cold room sensor measures temperature from −30 °C to +70 °C (typical accuracy ±0.3 °C above 0 °C, ±0.6 °C below) and relative humidity from 0 to 100 %, non-condensing; in blast chillers it monitors the holding phase.

The cold room sensor →

Available

Energy: electricity consumption of your cold rooms

Energy consumption readings for the cold room or fridge, per unit (single-phase or three-phase power meter) or at the electrical panel. You see the trend over time: running times getting longer, power draw rising for the same workload, consumption during closing hours. These are elements to weigh up together with the temperature and with whoever does your maintenance: KRYO makes them visible; it does not attribute causes and does not promise automatic diagnoses or savings percentages. Work on the electrical panel must be carried out by a qualified electrician.

Temperature, door openings and power draw for the same cold room are viewed on the same timeline: KRYO puts the data side by side; it does not attribute the cause on its own.

How energy monitoring works →

Available

Door: openings and closings

A sensor on the door of each cold room logs openings and closings, with time and duration. If the door stays open beyond the time you configure with us, a dedicated alert goes out before the temperature rises: no preset threshold, you decide based on how you work.

Available

Production room: ambient temperature and humidity

Temperature and relative humidity of ambient-temperature processing and storage areas: production room, dry store, proving area. The thresholds follow your self-monitoring plan; alerts arrive on the same channels as cold room temperature alerts. This is not a microbiological control.

In preparation

Expiry-date labels and inventory

A printer for the labels on products in your cold rooms: name, preparation or opening date, expiry date, location. Every label goes into the database, the inventory of each cold room updates itself and in the evening an alert tells you what expires tomorrow. Try a label →

Coming

Alerts on WhatsApp

Today, alerts arrive on Telegram and email. WhatsApp as an additional channel is in development: we are not promising a date.

What the service does, every day

1 · Measurement

Continuous watch, 24 hours a day

Every point is read at regular intervals, including at night, on closing days and during holidays. A sensor or central unit that stops communicating beyond the time limit triggers an alert: silence is never read as “All clear”.

2 · Alerts

We alert you while the problem is happening

On Telegram and email, to the recipients you name, with the verdict and what to check. First an Attention signal, after consecutive out-of-range readings, then Action required if the problem persists, with reminders until it is back within range. Escalation to a second contact, if nobody takes charge, is planned: we confirm it in the proposal.

3 · HACCP log

The log fills itself in

Every reading is saved with its date, time and source sensor and cannot be edited or deleted from the interface; every threshold change is tracked. For every cold room, every day, a verdict: compliant, compliant with remarks, non-compliant or incomplete monitoring. The log can be exported as a PDF per cold room and period, with an integrity fingerprint (SHA-256) kept in the log, ready for an inspection.

Monitoring and record-keeping obligations: what KRYO does and what remains with you

Regulation (EC) No 852/2004 requires every food business to have procedures based on HACCP principles, to respect the cold chain and to control temperatures, with records “where appropriate”, proportionate to the size of the business. For quick-frozen foods, Regulation (EC) No 37/2005 adds specific requirements: recording instruments compliant with EN 12830, EN 13485 and EN 13486, dated records kept for at least one year, with exemptions for retail display cabinets and for cold rooms under 10 m³ in retail outlets. Gelato and ice cream are not classed as quick-frozen foods. The KRYO cold room sensor is declared by its manufacturer to comply with EN 12830; compliance of the entire recording chain must be documented case by case.

KRYO provides continuous measurements, alerts and verifiable records for the temperature-related control points: that is how it helps you meet these obligations, within your self-monitoring plan. The plan, the critical limits, the corrective actions and the assessment of which requirements apply to your products remain yours and your consultant’s. Automatic monitoring is not compulsory for everyone, and KRYO on its own does not guarantee HACCP compliance: in the free assessment we check together what applies to you. The guide to HACCP temperatures, with sources →

What we don’t do

Saying it plainly helps you work out whether we are the right choice for you.

We don’t leave you with an app

We don’t hand you a dashboard full of charts to interpret. We give you a verdict: All clear, Attention, Action required.

We don’t sell HACCP consultancy

We don’t replace your consultant and have no interest in selling you anything else. We give them better data to do their job.

We don’t replace your maintenance

We make it something you can plan: we give your trusted technician precise data on which units to check and when.

Who we work for

For anyone storing food and products that depend on the cold chain: gelato shops and pastry shops, bakeries and food production labs, restaurants, café-bars and hotels, food production sites, as well as delicatessens, shops and cold stores. These are usually businesses that know they should be monitoring temperatures better but have neither the time nor the expertise to choose and configure a system. For them we do everything, from the initial assessment to configuration.

Do you run multiple sites? With KRYO you keep the cold chain of every site under control with the same service and the same type of alerts.

Want to know what to monitor in your business?

The assessment is free and, either way, leaves you with a clear map of your critical points and the obligations that apply to you.

Assess monitoring for your cold rooms
Assess monitoring for your cold rooms