Automatic cold-chain control for businesses that store food and other cold-chain products · wireless sensors, pre-configured kit

Energy · cold room electricity consumption

Monitoring the electricity consumption of fridges and cold rooms

Consumption trends as one more element, to be read alongside temperature.

Temperature tells you whether the cold is being maintained today. Electricity consumption tells you what it costs to maintain it and whether the unit is working harder than usual. With KRYO you measure it for each cold room or unit, single-phase or three-phase, and see it over time next to the temperature and door openings of the same cold room: information almost no business has, and one that helps you plan maintenance with those who do it for a living.

Why measure consumption

An efficient refrigeration unit maintains temperature with regular, stable operation over time. As efficiency declines, the unit tends to run longer to achieve the same result.

For days or weeks the internal temperature may stay within limits while consumption changes. Rising consumption can have many causes: load, door openings, season, defrost cycles, wear. On its own it does not tell you which.

Recording consumption means having one more element to weigh, alongside temperature, while the cold is still under control. KRYO makes it visible; the assessment remains with you and whoever does your maintenance: we do not attribute causes, and we do not promise automatic diagnoses or savings percentages.

What the readings make visible

  • The consumption trend of each unit, day by day
  • Running times growing longer than in previous weeks
  • Irregular duty cycles
  • Consumption during closing hours
  • Units that consume more than others for the same use
  • The indicative share of refrigeration in your energy costs

The per-unit meter measures the current drawn; power and energy are calculated from the current using reference voltage and power factor values, so they should be read as a trend, not as a billing meter.

Two levels of measurement

Per unit

The detail of each cold room and fridge

A dedicated meter for each unit, single-phase or three-phase depending on the supply, with current clamps on the conductors. It shows which unit draws the most and how that changes over time.

At the electrical panel

The overall picture

Measurement on the lines of the electrical panel. It shows the overall share of refrigeration and makes significant variations visible. It requires work on the panel, carried out by qualified personnel.

Single-phase · one clamp on the phase conductor · power in W/kW, energy in kWh
Three-phase · three clamps, one per phase · power in W/kW, energy in kWh

In both cases we start from your photos of the units and the panel: we define the solution and ship the meters pre-configured. Unlike the temperature sensors, any work on the electrical panel (opening it, fitting a clamp on a line, connections) must be carried out by qualified personnel: we state this in the proposal, with the associated timescales.

What you receive

Not tables of kilowatt-hours to interpret on your own, but the trend of each unit and a readable summary, in the same style as the rest of KRYO:

Trend

Day by day

Consumption and running times of each unit, compared with previous weeks.

To assess

Illustrative example

The fish cold room has shown longer running times for a few days, with temperature within limits: an element to raise with whoever does your maintenance, not a diagnosis.

With the temperature

Illustrative example

Freezer running continuously and temperature not dropping: the temperature alert goes out as always; the electrical trend adds an element for whoever responds, without indicating the cause on its own.

The aim is to give whoever does your maintenance the elements to schedule checks, rather than an emergency call-out while the business is in full swing, and a concrete idea of the energy drawn by refrigeration.

Questions about energy monitoring

Does installing the meters require an electrician?
When work on the electrical panel is involved, yes: opening the panel, fitting the clamp on a line and making connections must be carried out by qualified personnel. From your photos of the units and the panel we indicate the solution and, in the proposal, whether and where that work is needed.
Does it also work with three-phase units?
Yes: the meter is chosen according to the unit’s supply, single-phase or three-phase. The fitting point is defined from your photos of the panel and the units and confirmed in the proposal; fitting at the panel is done by qualified personnel.
Can I activate consumption monitoring on its own?
Consumption monitoring is an area of the KRYO service that is activated together with temperature monitoring: its value lies in relating the energy drawn to the cold actually maintained and to the door openings of the same cold room.
How much can be saved?
It depends on the condition of your units, and we do not quote percentages before measuring. The first result is seeing which units consume more than they should and deciding, with whoever does your maintenance, whether and when to act.

Want to know how your units’ consumption is trending?

Send us photos of your units and electrical panel: we’ll tell you what is worth measuring.

Assess monitoring for your cold rooms
Assess monitoring for your cold rooms