Automatic cold-chain control for businesses that store food and other cold-chain products · wireless sensors, pre-configured kit
Gelato shops, gelato production and pastry shops · display cases, storage freezers, cold rooms, production room

Monitoring display cases, storage freezers and production rooms for gelato and pastry shops

A few degrees can ruin a batch. KRYO alerts you first, not the morning after.

KRYO reads display cases, storage freezers, storage cold rooms, refrigerated cabinets and the production room every 3–5 minutes, from the neighbourhood gelato shop to the production site, and flags the anomaly while it is happening, so you can act in time and reduce the risk of loss. A rise of a few degrees alters the structure and quality of gelato, even after the temperature returns within limits; in a pastry shop it compromises creams, semifreddi and fillings. The history stays for the HACCP log and to understand what happened.

No commitment · All we need is your type of business, number of cold rooms, main requirement and your contact details

kryo · overnight watch · gelato shop ILLUSTRATIVE EXAMPLE
23:40PREMISES CLOSED 5 control points · continuous reading
Telegram · KRYOowner · production room manager
Simulation with sample values, not real data. Thresholds for display cases and storage freezers are set with you, product by product.
24/7display cases and storage freezers monitored even when the shop is closed
0cables to run through display cases and storage freezers
Same dayindicative activation of the temperature kit, after the network and coverage check
3 statesAll clear · Attention · Action required
What it monitors Gelato display casesStorage freezers and pozzetti cabinetsStorage cold roomsBlast chiller (holding phase)Production room fridgesGelato cakes and semi-finished productsConsumption of display cases and storage freezers (optional)

The problem

Why cold is even more critical in gelato and pastry shops

The damage remains even once the temperature is back to normal. That is why knowing early matters.

A few degrees make the difference

A rise in temperature changes the structure of gelato: creaminess and appearance in the display case suffer even after it is back in the cold.

Summer peaks

Outdoor heat and units at full load: a breakdown in high season is the most expensive of the year.

Production room and display case together

Storage freezers, blast chiller and display case are separate points, often in different rooms. Nobody watches them all, all the time.

What it monitors

What KRYO monitors in gelato shops, production and pastry shops

  • Gelato display cases, at night and on closing days too
  • Storage freezers and pozzetti cabinets
  • Freezers for bases, semi-finished products and gelato cakes
  • Finished-product storage cold rooms, at the production site
  • Blast chiller, in the holding phase
  • Production room fridges for milk, cream and fruit
  • Pastry shop: refrigerated cabinets for creams, semifreddi and fillings; pastry display cases; blast chiller
  • Doors of cold rooms and storage freezers: openings recorded with time and duration, alert if they stay open longer than the configured time
  • Production room temperature and humidity, in the same history as the cold rooms
  • Printed labels for tubs, bases, semi-finished products and pastry preparations: production and expiry dates, storage freezer inventory, alert before expiry
  • Electricity consumption of display cases and storage freezers (single-phase and three-phase), as a trend to read with maintenance

Cold room temperature is the base; door, energy, production room and labels are activated with the configuration agreed in the proposal. Thresholds are set with you, according to product and recipe.

Reference temperatures

ProductTemperature
Gelato in storage≤ −15 °C
Fruit gelato in storage≤ −10 °C
Pasteurised milk≤ +4 °C
Frozen foods≤ −18 °C

Sources: Italian D.P.R. 327/1980 (Annex C) and D.Lgs. 110/1992. Serving temperature in the display case depends on product and recipe. Gelato is not among the frozen foods covered by Directive 89/108/EEC: the specific obligations of Regulation (EC) No 37/2005 do not automatically apply to display cases; the self-monitoring plan and these references apply. Full HACCP temperature guide →

From the cold compartment to your phone, in five steps

  1. The sensor measuresInside the display case, storage freezer or cold room, close to the product. Battery-powered, wireless.
  2. Transmits by radioTo the central unit, connected to the router with a network cable.
  3. KRYO comparesEvery reading with the thresholds and waiting times set for display cases and storage freezers.
  4. It alerts youIf a value stays out of range: what is happening and what to check, on Telegram and email.
  5. Stays in the logOnce back in range, all clear. The non-conformity stays on record, with date, time and duration.

Installation

Wireless sensors for gelato display cases, storage freezers and production rooms

Inside the display case, no wires. In the production room, no building work.

The sensors are wireless and battery-powered, designed for display cases, storage freezers and cold rooms. From photos of your premises we define the best point for each one. The central unit plugs into the router with a network cable: the rest we check remotely.

  • The sensor goes inside the display caseWireless, battery-powered, in the cold compartment.
  • No false alarms from defrost cyclesThresholds and waiting times set on the normal cycles of each unit.
  • Useful during the winter closure tooBases, semi-finished products and gelato cakes stay under watch in the months when nobody comes by the production room.
typical setup · gelato shopWIRELESS
Battery-powered radio sensorsdisplay cases front of house · storage freezers, blast chiller and fridges in the production room
BATTERY-POWERED
Central unitone network cable to the router · pre-configured for your business
PRE-CONFIGURED
Alerts and logTelegram · email · automatic HACCP log
24/7
Door, energy, production room, labelspower meters for display cases and storage freezers · door sensors · production room sensor · label printer
ON REQUEST

Security

Remotely managed display cases and storage freezers: why an independent measurement is needed

KRYO measures, it does not control. Whatever the cause, you know first.

On the night of 11–12 October 2026, a cyberattack pushed the refrigeration systems of more than 350 French supermarkets to 50 °C by altering the defrost cycles. The spoilage carried on until morning. In a gelato shop, a few degrees for far less time is all it takes. The case, with sources →

Independent measurement

The sensors sit inside display cases and storage freezers, battery-powered and wireless. They are not connected to the controllers: they read the actual temperature, not the one the unit reports.

KRYO measures. It does not control.

No KRYO component can change thresholds, defrost cycles or settings on your units. It adds no access point to your refrigeration.

An alert whatever the cause

Lid left open, a fault, an irregular defrost or remote tampering: if the temperature stays out of range, the alert goes out. During the night, not the morning after, so you can act in time and reduce the risk of loss.

When KRYO makes the difference

Four typical situations, from event to action

Data and messages are illustrative examples.

Display case warming up after closing

  1. Event detectedDisplay case at −9 °C at 00:40, two consecutive readings above the −12 °C threshold.
  2. AlertTo the owner on Telegram and email; ‘Action required’ also goes to the manager if it continues.
  3. CheckIn the history: night lid not in place, unit drawing maximum power.
  4. Possible actionGo in to close it or move the tubs to the storage freezer; the non-conformity stays on record.

Storage cold room door left open during production

  1. Event detectedDoor open for 7 minutes while loading tubs, threshold 5 minutes.
  2. AlertA dedicated door message, before the cold room temperature rises.
  3. CheckThe door-opening history shows how often it happens on production days.
  4. Possible actionClose the door, change the loading sequence or review the threshold with us.

Semifreddo and creams in the pastry shop, on a Sunday

  1. Event detectedRefrigerated cabinet rising steadily since 14:00, production room closed.
  2. AlertAttention first, then Action required, to the owner and the production room manager.
  3. CheckElectrical consumption at zero since the same time: the unit has stopped.
  4. Possible actionMove the product to the blast chiller in holding mode or to another cold room; call the technician with the data to hand.

Storage freezers before the season

  1. Information availableConsumption trend of each storage freezer over recent weeks, alongside temperature.
  2. ReviewOne of the storage freezers runs longer than the others at the same temperature.
  3. CheckWith your maintenance contractor: gasket, condenser, refrigerant charge. KRYO does not identify the cause.
  4. Possible actionA service check in March instead of July.

Energy · consumption of display cases and storage freezers

Prepare for the season, don’t chase it

The efficiency of display cases and storage freezers as a risk indicator.

Prevention

Loss of efficiency shows up early

A unit that is losing efficiency tends to draw more power and run longer to hold the same temperature. KRYO makes the consumption trend of each display case and storage freezer visible: a signal to read with your maintenance contractor, before the season.

Planning

Maintenance in March, not July

The service check becomes a scheduled job in the low season, instead of an emergency in the month when every hour counts.

Costs

What the cold costs

The real share of your energy use taken by display cases and storage freezers, per unit or at the panel. See the consumption analysis →

FAQ

Questions from gelato makers and pastry chefs

Can the sensor sit inside the gelato display case?
Yes. The sensors are wireless and designed for display cases, storage freezers and cold rooms. From your photos of the display case we define the best point to place it.
Do defrost cycles cause false alarms?
No. Thresholds and delay times are set on the normal cycles of each unit, so alerts are sent only for real problems.
Are labels useful in a gelato shop or pastry shop too?
Yes. In the agreed configuration, the service includes a printer for labelling tubs, bases, semi-finished products, creams and preparations: production and expiry dates, and the product enters the inventory of the cold room or storage freezer. Before it expires you receive an alert, on the same channels as the temperature.
Does the sensor measure the gelato or the air in the display case?
The air in the compartment, at the point where it is placed. The product changes temperature more slowly than the air: that is why alerts go out after several consecutive out-of-range readings and the daily verdict weighs the duration of excursions, not the single spike of a door opening.
I have a blast chiller in my pastry shop: does it monitor that?
In the holding phase, yes, like any other cold room. The blast-chilling cycle requires specific instruments and validations that we do not claim for this sensor.
Is it worth it if the gelato shop closes in winter?
Yes, if you store bases, semi-finished products or gelato cakes: during the closed months nobody drops by the production room to check.
Do frozen-food obligations apply to gelato?
No, not automatically: frozen-food legislation (Directive 89/108/EEC, Italian D.Lgs. 110/1992, Regulation (EC) No 37/2005) excludes gelato. For display cases and storage freezers what counts is your self-monitoring plan and the reference values of Italian D.P.R. 327/1980. If you also store semi-finished or frozen products, we check it with you in the free assessment: KRYO helps you meet your temperature monitoring and recording obligations, it does not replace them.
Do I need a technician to install it?
For the temperature kit, in most cases no: it arrives pre-configured based on your photos, you connect the central unit to the router with a network cable and place the sensors. We confirm radio coverage and positions at the initial check; activation is normally the same day, if network and coverage allow. Any meters at the electrical panel require qualified personnel.
How do I receive alerts, and who responds?
On Telegram and email; WhatsApp support is coming soon. You can name several recipients, for example the owner and the production room manager. Responding remains with whoever receives the alert: KRYO measures and alerts, it does not act on your units.

Free assessment

Protect next season, starting now.

Send us photos of your display cases, storage freezers and production room, plus where your router is. We tell you what to monitor and how, before any proposal.

Not a platform to manage. Choosing KRYO means choosing evidence: real, because it is measured inside display cases and storage freezers; verifiable, with date and time and not editable by hand; ready when needed, for you and for whoever carries out the checks.

Why it’s free: without seeing your display cases, storage freezers and router we cannot tell you what you really need. Photos are enough for us to prepare a precise proposal, with the points to monitor and the recommended thresholds.

Prefer to email? [email protected]

Want to add your name, town, photos or details? (optional)

The photos are for the preliminary assessment: radio coverage and sensor positions are checked at activation.

No obligation · We get back to you ourselves, not a call centre.

Prefer to email? [email protected] ·

Assess monitoring for your cold rooms